Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Audi S7 introduce

The all-new Audi S7 sports model is synonymous with "excellent performance" and "dynamic design". It is equipped with Audi's new 4.0-liter V8 TFSI twin turbocharged fuel direct injection engine, with a power output of up to 309 kilowatts (420 horsepower). Due to the use of new "cylinder on-demand" technology, the average fuel consumption per 100 kilometers is only 9.6 liters and 9.7 liters, respectively. With advanced chassis, lightweight body, and exquisite interior, Make the all-new Audi the perfect masterpiece in the sports car market The S7 is developed based on the Audi A7, which is also the first generation model of this series The S7 Sportback and the regular Audi A7 Sportback, although not significantly different in appearance, have added some masculine muscle lines on the basis of their original luxury, showcasing a full sense of sportiness, including the addition of lower turbulence on the front bumper, honeycomb shaped left and right lower air intakes, and the addition of body side skirts. The rear bumper also adds lower turbulence, and the exhaust tailpipe is changed to a dual sided four out setting, At the same time, it comes standard with 19 inch aluminum alloy wheels, fully boasting the title of S7 Sportback in terms of performance