On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Audi S8 is the sporty performance version of the Audi A8. The all-new Audi S8 is only modified from the new A8 in terms of exterior and interior details. In terms of exterior design, the Audi S8 is not much more aggressive than the regular A8. In terms of power, the all-new Audi S8 is equipped with a 4.0TFSI twin turbocharged engine, with a maximum power of no less than 520 horsepower and a continuous torque output of 650N · m at 1700rpm-5500rpm. Audi launched the first generation S8 as early as 1994, As the sport version of Audi's top luxury car A8, it applied all of Audi's top technologies at the time, such as an all aluminum body frame and full-time four-wheel drive. Luxury cars were originally aimed at high-end demand, and most of them should be aimed at rear seat users, so the sport version S8 that leans towards driving pleasure is definitely only aimed at a few out of a few. Audi had been optimistic about this niche market for a decade, and now continues to make every effort to launch the new generation S8, And still playing the role of "Audi's cutting-edge technology collection"
Copyright © 2021.Company name All rights reserved.