Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Audi TT introduce

The Audi TT is a sports car developed by Audi, which was first launched in 1998. As a sports sedan, the TT model has achieved great success in the market with its almost identical beautiful appearance and excellent performance to the concept car version. In the early stages of the first generation, some car owners complained about unstable high-speed turning and accidents. Audi adjusted the suspension system of the TT and added a rear spoiler version to the rear of the car, reducing the lift at the rear of the Audi TT from 148 pounds to 53 pounds at a speed of 125 miles per hour, The 64 pound rear lift of the BMW Z3 Coupe and the 68 pound Porsche Boxster, as well as the 104 pound Mercedes SLK, are lower than those of the same period at the same speed. The Audi TT is a pure sports car. There are three models sold in China, namely the TT Coupe 1.8t, TT 2.0TSI, and TT 3.2quattro convertible (soft top). Audi continues to launch a series of completely new cars, from A4.A6 to the current A8 and TT. [2] Audi TT's competitors include BMW X1, Mercedes SLK, etc