Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Audi A4L introduce

The Audi A4L is an entry-level luxury B-class sedan produced by FAW Audi. The characteristics of this car are its atmospheric and stable body, meticulous workmanship, solid materials, rich configuration, spacious space, and good handling A4L was officially released on November 16, 2008, and the front face design of the new Audi A4L continues to use the family's expensive sports car design style. The price range of Audi A4L is 272800-578100. The domestic version of the new generation Audi A4 was officially named: Audi A4L. Audi A4L is a new car that Audi only launched in the Chinese Mainland market. The relationship between the new car and A6 and A6L is similar, and it is also after foreign models are made in mainland China, A model derived from changes in configuration and market demand. After higher level mid to high end luxury cars have chosen to be lengthened in China and received good market feedback, this idea is now extending to its lower level mid size car market. Compared with the European version of the Audi A4, the domestic version of the Audi A4L has lengthened the body length by 60mm, reaching 4763mm, and the wheelbase has been lengthened by 61mm, reaching 2869mm, Satisfying the higher requirements of Chinese users for rear passenger space