Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Ripher introduce

From the feedback from Huapu's car enthusiasts forum, it can be seen that major problems are not common, and small problems are constantly a common problem. Here, I just want to say that there are also quite a few million BMW problems, and everything has problems that are not perfect. The 50000 yuan sedan, at such a low price point, is quite attractive. Based on the information I have learned, let me tell you about the Huapu Langfeng: the predecessor of the current sea area is the Langfeng, Later it was changed to a sea area, and now many of the sea areas on the forum are old models of the Langfeng. This car was once popular, but unfortunately it did not continue to develop. Even the Huapu brand was not retained, and now it has been changed to the UK, a joint venture brand. Currently, the Huapu Langfeng has been discontinued, and because it is an older model, many configurations are not as good as the current car. Therefore, it is recommended that those who purchase a second-hand Huapu Langfeng should change to a different model