On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Huanghai Xiaochai Shen carriage is generally equipped with anti glare reverse mirrors, which are composed of a special mirror, two photodiodes, and an electronic controller. The Huanghai Xiaochai Shen electronic controller receives front and rear light signals sent by the photodiodes. After closing the switch at the speed required by the driver, it automatically maintains the speed without stepping on the accelerator pedal, allowing the vehicle to travel at a fixed speed. This device is used, After driving for a long time on the highway, the Yellow Sea Little Chai God no longer needs to control the accelerator pedal, reducing fatigue and unnecessary speed changes, which can save fuel
Copyright © 2021.Company name All rights reserved.