air conditioning compressor introduce

On the lower right corner of the engine belt, below the generator. The car air conditioning compressor is installed on the engine, and the belt drives the car air conditioning compressor to work together with the engine. You can find the specific location of the car air conditioning compressor by looking for the belt. The following is an introduction to the car air conditioning compressor: 1. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, The compressor plays a role in compressing and transporting refrigerant vapor. There are two types of compressors: constant displacement and variable displacement. According to different working principles, air conditioning compressors can be divided into fixed displacement compressors and variable displacement compressors. 2. In the entire system, the compressor is responsible for compressing and driving the refrigerant. Under the drive of the engine, it continuously sucks in the low-temperature and low-pressure refrigerant vapor generated by the heat absorption and vaporization in the evaporator, which is compressed to form high-temperature and high-pressure refrigerant vapor, Discharged into the condenser, it creates high-pressure conditions for the refrigerant to continuously condense and release heat in the condenser. At the same time, it overcomes the circulating flow resistance of the refrigerant in the refrigeration circuit. Helps the automotive parts platform to provide ordering services for original parts of air conditioning compressors for various vehicle models)

Steps for disassembling and assembling automotive air compressors:

Steps for disassembling and assembling a car air compressor: 1. Disassembly sequence of the compressor: Disconnect the power supply, discharge the refrigerant from the compressor, remove the high-pressure and low-pressure pipes respectively, and seal the nozzles of the high-pressure and low-pressure pipes to prevent foreign objects or air from entering. Disconnect the wires of the electromagnetic clutch. Use a special tool to loosen the fixing bolts of the compressor, remove the triangular belt, and the compressor can be removed. 2. Installation sequence of the compressor: When installing the compressor, It should be noted that the groove surfaces of the clutch pulley and the engine pulley are corresponding and on the same plane. The gap between the condenser and the fan should not be less than 20 millimeters, and the standard gap between the compressor, compressor seat, and hose is 15 millimeters. To prevent refrigerant leakage, please replace the O-ring when installing the high-pressure and low-pressure pipes of the compressor. Tighten all fasteners with the specified tools and torque. Finally, Check for leaks in the engine fuel supply system and cooling system

Jeep2500 introduce

The Jeep 2500 series products produced by Beijing Jeep Automobile Co., Ltd. are lightweight off-road vehicles that have been introduced with advanced technology from Chrysler in the United States and improved based on the actual situation in China. They have the advantages of safety, comfort, wide use, environmental protection, and economy. The appearance improvement project this time is to maintain its rugged style while designing the details of the front radiator grille to make it more classic and detailed, The style is also more full-bodied, mainly to enhance texture and reflect the improvement of the overall quality level in subtle aspects. It has always been known as the flagship of China's economy SUVs. With its good brand appeal and extremely high cost performance advantages, it presents a situation of supply shortage in the market