Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Jiangnan Elf (JNJ7III) is a fully redesigned and upgraded version of Jiangnan Automobile's original Alto chassis. It is positioned as a fashionable car for urban roads and is equipped with a 1.1-liter inline 4-cylinder 8-valve, four stroke water-cooled, multi-point sequential electronic fuel injection engine. The top speed is 120 kilometers per hour, and the output power is as high as 38.5 kW. The matched transmission is a 5-speed manual transmission, and the controllers coordinate the strain to make the handling sensitive and comfortable. The fuel consumption standard is 5L/100 kilometers, ensuring low fuel consumption while also providing high environmental protection
Copyright © 2021.Company name All rights reserved.