electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Chrysler 300M introduce

Basic parameters: Manufacturer Chrysler brand Chrysler model (style) 2002 Chrysler 300M production time (year) 2002 Drive form Front wheel drive fuel consumption (L/100km) 10 Main dimensions and mass: Length/width/height (mm) 5024/1890/1422 wheelbase (mm) 2870 wheelbase (front and rear) (mm) 1574/1564 Rear trunk volume (L) 530 Fuel tank volume (L) 64 curb weight (kg) 1629 engine parameters: engine position front engine, longitudinally placed engine type V6 60 degree angle DOHC 24V cylinder number 6 cylinder diameter/stroke (mmXmm) 96.00 × 81.00 displacement (mL) 3518 compression ratio 9.90:1 ignition mode SMPFi maximum power (kw) 253.5PS (186.4 kW)/6400rpm maximum torque (N.m) 339.0Nm (34.6 kgm)/3900rpm chassis parameters: transmission type 4A suspension (front/rear) front lateral swing arm, elastic strut, stabilizer bar rear multi steering shaft, elastic strut, Lateral stabilizer bar braking device type (front/rear)) front and rear ventilated disc with ABS tire type and specifications (km/h) Michelin Energy MXV4 Plus P225/55 R 17 Body parameters: number of doors 4 seats 4/5 drag coefficient 0.313 minimum turning diameter 11.50 Other: domestic reference price (RMB 10000) 46 international reference price (USD 10000) 2.91