Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

BMW Z8 introduce

The Z8 has created a brand new concept of automobiles and is proudly entering the ranks of world-renowned sports cars. It is the most outstanding super driving machine provided for true experts, a car that dreams of passion and excitement come true. The exterior design of the Z8 is unique, with a long engine hood, wide wheels, and dynamic exhaust vents on both sides of the body, All of them evoke memories of the "beautiful old days". The Z8 has turned people's nostalgia and passion for the BMW 507 into a reality. However, like the 507, this car is a rare treasure, and enthusiastic car enthusiasts do not have the opportunity to pay tribute to it every day The people who turn their dreams on the wheels into reality are those passionate and passionate designers and engineers who work together to create such a masterpiece. In the design and development process of the Z8, they have complete freedom to create a truly passionate two seater sports car, which was born specifically for driving pleasure and instant passion. A sports car with awe inspiring charm: powerful and smooth like water, Leadership is fashionable yet unique, possessing all the capital to create another car myth