How much does the AC Schnitzer ACS5 blower resistor cost
Often, car owners and netizens ask how much the AC Schnitzer ACS5 blower resistor accessories cost.Below, the editor will analyze it for everyone, hoping to provide some substantial assistance to netizens. belongs to the model..The design of the front face of the AC Schnitzer ACS5 is consistent with the style of the ACS6, with the addition of chrome trim on the left and right brake cooling vents, which can be considered as the final design of the prototype X5. The aerodynamic package, apart from the front and rear bumpers, has been redesigned with the entire wheel arches, increasing the width of the vehicle body. The rear lower bumper and four exhausts of the car are very eye-catching, and the lower spoiler is made of carbon fiber material
AC Schnitzer ACS5The price of original factory accessories is not cheap.Some AC Schnitzer ACS5 sub factory parts are also well made， Sometimes it can be utilized。AC Schnitzer ACS5 dismantling parts are also a good choice。AC Schnitzer ACS5 Disassembled parts can be purchased,It depends on what type of accessory it is. AC Schnitzer ACS5 dismantling parts with wear and tear parts cannot be purchased，For example, brake discs and electrical accessories。 At the same time, the core components such as the engine, gearbox, and chassis, as well as the other type of car audio products, pose safety hazards when disassembling the vehicle components first。 Safety always comes first in everything，Although AC Schnitzer ACS5 dismantling parts are original factory parts，But after all, it's a Old item,There may be wear and even damage，Performance is not guaranteed。 Therefore, functional components such as the engine, gearbox, transmission shaft, etc. should not be purchased as disassembled parts。
AC Schnitzer introduce:
AC Schnitzer contain AC Schnitzer ACS5,AC Schnitzer ACS6,AC Schnitzer ACS7,.AC Schnitzer ACS5 belongs to the sedan model, which is relatively suitable for home use.。
AC Schnitzer ACS5 blower resistor introduce
The function of a car blower is to blow the cold air from the evaporator box of the air conditioner or the hot air from the warm water tank into the car. There is nothing inside the blower, just a motor. The resistor of the blower is used for speed regulation. By connecting a resistor in the circuit that supplies power to the blower, the blower speed can be reduced and the air volume can be adjusted. By adjusting the knob, The circuit can be connected or not connected with resistors of different resistance values. In other words, it is to string resistors to the blower. The higher the resistance value of the string, the lower the speed, and the highest speed is achieved without adding resistors
AC Schnitzer ACS5 blower resistor Installation steps.
If the car owner disassembles and installs the AC Schnitzer ACS5 blower resistor themselves,There are still some steps involved，also，The YiFan platform also does not recommend car owners to install and disassemble it themselves，To avoid unnecessary losses caused by damage to accessories. It is recommended to go to a repair shop for operation, after all, it is better for professionals to do professional things. However, the installation and disassembly steps have been summarized for the car owner's reference only. It is recommended to go to a car repair shop for operation，After all, it's better for professionals to do professional things.But it still summarizes the installation and disassembly steps for the car owner's reference only.
1. Prepare tools such as blower resistors and Phillips screwdrivers for replacement, then turn off all electrical equipment and ignition switches in the vehicle. 2. Disconnect the vehicle's battery and disconnect the blower assembly connector (the blower is usually located under the storage box in front of the passenger seat), remove the blower fixing harness, and then remove the blower assembly fixing screw. 3. The resistor can be found at the location where the blower was removed (connected near the air duct), Use tools to remove it and replace the new resistor. 4. Reinstall the blower and various circuits, then power on the battery, start the car and start the blower to see if it can adjust the wind speed
What are the purchasing channels for AC Schnitzer ACS5 blower resistor
Now let's return to the focus of this article，How much does the AC Schnitzer ACS5 blower resistor cost。 If only one model and accessory name are provided,It is generally impossible to know how much it costs. Because some AC Schnitzer ACS5 have different production times，AC Schnitzer ACS5 accessories are also different， AC Schnitzer ACS5 blower resistor materials are also different,So it cannot be generalized. According to the production date and VIN of the AC Schnitzer ACS5 of the car owner,Just know the specific price of the accessories. There are many channels for purchasing automotive parts and accessories. For example, Taobao and JD.com,There are also various platforms specialized in online sales of automotive parts, and so on. Each has its own advantages and disadvantages. There are many secondary components on Taobao,JD has many vulnerable parts,Rich in products such as engine oil and wipers. But some large items are difficult to ship.If there are returns or exchanges, it can still be a bit troublesome. Generally, provide the AC Schnitzer ACS5 VIN,If it's a precise match,No problem.So netizens must keep their eyes open when purchasing AC Schnitzer ACS5 car accessories,To avoid unnecessary trouble caused by returns and exchanges. The above is the summary of "AC Schnitzer ACS5 blower resistor accessories cost" provided by YiFan platform for everyone.Hope it can be helpful to car owners.
