front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Opel GT introduce

The all-new Opel GT sports car incorporates fashion elements into the design concept of a two seater sports car. It has a powerful front engine, rear wheel drive, a dynamic cab, and a specially designed fabric soft top. The slender front end, wide body, smooth exterior, and short suspension create its proud and unique figure The Opel GT, like the Sky, adopts an FR layout. The engine is a 260 horsepower 2.0-liter ECOTEC turbocharged version. The Opel GT accelerates from rest to 100 kilometers per hour in just 6 seconds, with a top speed of 230 kilometers per hour. The more obvious evidence of the Opel GT's American heritage is its origin. It will be produced at the General Motors factory in Wilmington, Delaware, just like the two American cars mentioned earlier The Opel GT sports car is a European sisters version of Pontic and a clone of Saturn Sky. It has two seats and is rear wheel drive. A 2.0-liter four cylinder ECOTEC turbocharged engine provides power, with a maximum horsepower of 260 hp. The car has a strong grip on the ground from 0 to 60 mph in less than 6 seconds. The 18 inch tires give the car an extremely strong grip. The Opel GT made its first global debut at the 76th Geneva International Auto Show in March 2006. It was launched in Europe in January 2007, starting at 30675 euros, about 308000 yuan