Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
As a key product in the A0 level family sedan segment of the Qiyun brand, Qiyun 1 has been widely recognized and favored by consumers since its launch, and has achieved excellent sales performance together with the entire Qiyun brand. While inheriting classic quality, the 2012 Qiyun 1, The four major optimizations and 14 upgrades in appearance, configuration, quality, and energy efficiency are the capital for Qiyun brand to gain more consumer favor. The launch of the 2012 Qiyun 1 will further strengthen Qiyun brand's image in the minds of consumers, laying the foundation for Qiyun brand to solidify its leading position among independent brands in the more intense market competition in 2012
Copyright © 2021.Company name All rights reserved.