The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
Dongfeng Yueda Kia K5 is a sporty mid to high end sedan, representing Kia's leading car making philosophy and cutting-edge technology The K5 was designed by Peter Shirrell, one of the world's three great automotive design masters The K5 has a simple and atmospheric appearance, fashionable and dynamic; Unique interior design; Large legroom; Flexible handling and solid chassis; Smooth speed change; Rich configuration
Copyright © 2021.Company name All rights reserved.