Front lower swing arm introduce

The function of the front wheel lower control arm is to support the vehicle body, fix and support the wheels. The front wheel lower control arm is usually made of steel material, and the use of this material's control arm is due to its high strength, elongation, excellent formability and flanging performance, good rust prevention performance, and effective buffering of vibration generated during car driving. The function of the car lower control arm is to cushion vibration during car driving, Among them, the shock absorber is used to cooperate with the swing arm and play a buffering role. 2. Material: The swing arm has a variety of materials, including aluminum alloy, cast iron, double-layer stamped parts, single-layer stamped parts, all of which have advantages and disadvantages. Stamped parts have better toughness, but their strength is not enough, and they are easy to break under impact. 3. Rust prevention: You can usually check whether the swing arm is rusted by yourself. The position of the swing arm is located in the component connecting the front tire and the center of the car, which is easy to check, If rust is found, it is necessary to promptly go to the 4S store for treatment to prevent accidents caused by breakage)

Steps to replace the car's lower control arm:

The steps to replace the car's lower swing arm: 1. Remove the screw of the welding part between the swing arm and the front axle. This screw can be removed together with a No. 18 socket and wrench, without any obstruction around it, making it easy to disassemble. Remove the fixing screw of the support rod, where there are two screws connected to the lower swing arm, just remove these two screws; 2. Remove the fixing screw of the steering knuckle. This screw is slightly harder than the first two. You can use a No. 16 wrench to match the No. 16 socket to remove the screw and screw. Remove the swing arm. After removing all screws, you can use a hammer to knock down the swing arm. Pay attention to safety when knocking on the door; 3. Install a new connecting screw between the rocker arm and the steering knuckle. The installation process is relatively simple, just reverse the disassembly process and tighten the screw according to the specified torque. When installing the screw, tap the rocker arm upwards until the fixing bolt can pass through smoothly. Install the support rod fixing screw. After connecting the rocker arm to the support rod, tighten the two screws. 4. Install the fixing screws of the welded parts. As long as the holes are aligned, the bolt can pass through smoothly, Tighten the nut installation. In summary, it is best to perform four-wheel alignment on the vehicle after replacing the swing arm to prevent it from going in the wrong direction

Qingling multifunctional vehicle introduce

The Isuzu (ISUZU) multifunctional car is a multifunctional car owned by Chongqing Qingling Automobile Co., Ltd. It is a project jointly developed by Chongqing, China and Japan's Isuzu Automobile Company, specializing in the production of Isuzu (ISUZU) multifunctional cars. The exterior design of this car adopts Isuzu Rodeo technology, and the car is fashionable, smooth and soft, suitable for the appreciation habits of Easterners. The seating space is relatively spacious, and the luggage capacity can be expanded from 991 liters to 2121 liters depending on the seat changes, The upper and lower parts of the tailgate can be fully opened, making it convenient to place objects. Borrowing from the chassis of the Isuzu pickup truck, the model with four-wheel drive function is composed of six crossbeams, and important positions such as the water tank, transmission, fuel tank, and transfer box under the body are equipped with collision protection plates. The ground clearance is relatively large, and it has a certain degree of off-road performance, so it has good versatility. The market price of this car is about 180000 yuan for four-wheel drive models and 170000 yuan for two wheel drive models, From a performance to price perspective, it is relatively ideal ISUZU is a globally recognized outstanding automotive brand, representing the perfect combination of excellent performance and safety and comfort. Qingling Automobile Co., Ltd., in response to the needs of the Chinese market, has simultaneously introduced the most advanced design concepts and manufacturing technologies of ISUZU from Japan. With a scientific and pragmatic attitude, a proactive spirit, and the spirit of climbing to new heights, we are manufacturing the world's advanced level of cars for China - the RODEO Sports Multi functional Vehicle, whether it is leisure off-road, Whether it's for urban commuting, it showcases its natural elegance and heroism. From design to production, the competitive multifunctional car follows the principles of ergonomics, and is equipped with user-friendly design principles from large to small parts. The car is equipped with easily accessible switches and control systems, electric rearview mirrors, high-end walnut wood decorative panels, adjustable steering wheel, map lighting, adjustable front and rear seats, and a variety of combinations. The rear seats can be completely flattened, The luggage area can be expanded from 1.3 square meters to 2.3 square meters