The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The large curved body surface, headlights, turn signals, and scattered front grille, as well as the huge wheel arches and hidden spare tire rack that affect the rear view, all inject new inspiration into the calm and stable SUV design The VehiCROSS series is equipped with a 3.5-liter 24 valve V6 engine, which is the most powerful engine equipped by Isuzu in SUVs, with a maximum power of 160kW and a maximum torque of 312Nm The VX-4 is equipped with an all aluminum engine and a 4-speed automatic transmission, and uses the "Instant Torque (TOD)" automatic full-time four-wheel drive technology, which can obtain the required power according to climate and road conditions. Under normal driving conditions, the TOD system behaves as rear wheel drive, but when the road conditions change, it will transmit torque to the front wheels as needed to provide sufficient grip TOD uses 12 sensors to detect the working status of each half axle, including vehicle speed, axle speed, throttle opening, braking, and ABS system status, to prevent tire adhesion loss
Copyright © 2021.Company name All rights reserved.