The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The appearance of the Yusheng 007 is compact, with 7 body colors including Gris Silver, Dali Grey, Inca Light Blue, and Falcon Green, giving consumers a lot of choice. The side profile of the Beiqi Yusheng 007 has a strong Japanese SUV flavor, with front and rear bumper guards, roof luggage racks, significantly raised wheel arches, and side pedals all displaying the characteristics of an SUV model. The LED turn signals in the exterior mirrors on both sides of the body give it a luxurious feeling
Copyright © 2021.Company name All rights reserved.