Rear bumper leather introduce

The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)

The method for replacing the rear bumper is:

The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light

Beijing Mercedes Benz GLK Class introduce

The Beijing Mercedes-Benz GLK300 is equipped with Mercedes-Benz's 4Matic all-wheel-drive system, which means that all four wheels of the GLK will always have power transferred to the wheels from the engine via the transmission. This means that all four wheels of the GLK will always have power from the engine via the transmission and the splitter to the wheels. The GLK is not equipped with front or rear differential locks. The GLK is not equipped with front or rear differential locks. When one of the wheels slips, the 4Matic system uses the limited-slip function integrated into the ESP to lock one wheel by using the brakes to transfer power to the other wheel, thus realizing a function similar to differential lock.