tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Aiwei Ou hatchback introduce

The Chevrolet Avio was born on General Motors' latest and most advanced Gamma II small car platform, which has excellent suspension system configuration. The Avio adopts a BFI frame integrated structure and an integrated stamped steel structure for the side body, using over 60% high-strength steel. In addition, the top and A The key parts such as the B-pillar are made of ultra-high strength steel, ensuring the strength of the vehicle. The front suspension of the Avio adopts a MacPherson suspension, while the rear suspension adopts a torsion beam semi independent suspension with double-layer and tubular V-beams, making the overall weight of the vehicle lighter and occupying less space for rear passengers