The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Citroen has extended the range of C2 models and launched a more sporty C2 VTS. The new version further pushes the C2 forward The C2 VTS will be combined with the VTR model, hoping to achieve the same success as the previous Saxo VTS The launch of C2 is an important component of Citroen's brand strategy in China. This new car will be produced on Citroen's No.1 platform, further enriching Dongfeng Citroen's brand product line and providing continuous momentum for brand improvement and sales growth
Copyright © 2021.Company name All rights reserved.