The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
The Xiali N7 is built on the current Xiali N5 platform, with dimensions of 3920/1645/1485mm in length, width, and height, and a wheelbase of 2405mm, which is the same as the Xiali N5. In terms of appearance, the mass-produced models are slightly different from those exhibited at the auto show. The grille has been redesigned and new five spoke wheels have been replaced. The chrome logo on the rear of the car shows that it will be named "Xiali N7", indicating that the new car will be added to the Xiali N series product line. In terms of configuration, The Xiali N7 is expected to be equipped with a multifunctional steering wheel TPMS tire pressure monitoring system BOS brake priority system ISS intelligent fuel saving system, etc
Copyright © 2021.Company name All rights reserved.