Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Xiali N7 introduce

The Xiali N7 is built on the current Xiali N5 platform, with dimensions of 3920/1645/1485mm in length, width, and height, and a wheelbase of 2405mm, which is the same as the Xiali N5. In terms of appearance, the mass-produced models are slightly different from those exhibited at the auto show. The grille has been redesigned and new five spoke wheels have been replaced. The chrome logo on the rear of the car shows that it will be named "Xiali N7", indicating that the new car will be added to the Xiali N series product line. In terms of configuration, The Xiali N7 is expected to be equipped with a multifunctional steering wheel TPMS tire pressure monitoring system BOS brake priority system ISS intelligent fuel saving system, etc