Transmission valve body introduce

Transmission valve body: Introduction to the transmission valve body: 1. The transmission valve body can be used for shifting between high and low gears. When the vehicle speed reaches a certain gear, hydraulic oil pushes the valve body to automatically shift the gear to that gear. The automatic transmission can automatically change the transmission ratio according to the engine load and speed, so that the car can achieve good power and fuel economy, and reduce engine emissions pollution. 2. The automatic transmission is easy to operate, When vehicles are congested, it can greatly improve the safety and reliability of vehicle operation. Electronic controlled automatic transmissions are usually composed of five parts: hydraulic torque converter, planetary gear transmission system, shift actuator, hydraulic control system, and electronic control system)

Symptoms of Damaged Transmission Valve Body

The function of the gearbox valve body is to drive the gearbox to shift high and low. The gearbox valve body controls various shifting mechanisms by converting the oil circuits inside the valve body. Of course, there may be damage to components on the vehicle, such as the gearbox valve body. The reasons for damage may include the following: 1. Insufficient internal pressure caused by structural damage or insufficient sealing inside the valve body, resulting in difficulty in separating or combining shifting actions; 2. The electromagnetic valve or mechanical part inside the valve body is damaged, causing the original function to not function properly; 3. If the oil in the valve body is used for too long and there are too many impurities in the oil, it will cause the valve body to operate slowly. If the time is too long, it will exacerbate the wear of the valve body. Symptoms of a damaged transmission valve body: 1. Impact sensation during upshifting and downshifting, and obvious jerking during shifting; 2. There is a strong jerking sensation when shifting gears, and the shifting motion is not smooth, etc; 3. The gearbox makes abnormal noises while driving; 4. The instrument panel displays a transmission fault light

Xiali N7 introduce

The Xiali N7 is built on the current Xiali N5 platform, with dimensions of 3920/1645/1485mm in length, width, and height, and a wheelbase of 2405mm, which is the same as the Xiali N5. In terms of appearance, the mass-produced models are slightly different from those exhibited at the auto show. The grille has been redesigned and new five spoke wheels have been replaced. The chrome logo on the rear of the car shows that it will be named "Xiali N7", indicating that the new car will be added to the Xiali N series product line. In terms of configuration, The Xiali N7 is expected to be equipped with a multifunctional steering wheel TPMS tire pressure monitoring system BOS brake priority system ISS intelligent fuel saving system, etc