Front wheel horn introduce

The sheep horn of a car is called a "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn". The steering knuckle, also known as a "sheep horn", is one of the important parts in the steering axle of a car, which can make the car stable and sensitively transmit the direction of travel. The function of the steering knuckle is to transmit and bear the front load of the car, Support and drive the front wheels to rotate around the main pin, causing the car to turn. In the driving state of the car, it bears variable impact loads, so it is required to have high strength. The front axle is equipped with a front axle head on the axle and a steering arm on the seat, just like a sheep horn, so it is called a sheep horn. Generally, it is connected to the front axle by the Liren axle, which is often the case on trucks, Nowadays, cars are all equipped with independent suspensions. Hello, the sheep horn of a car is also known as the steering knuckle assembly. The steering knuckle is one of the main components on the steering axle of a car, which can ensure stable driving and sensitively transmit the direction of travel. The function of the steering knuckle is to bear the load on the front of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears variable impact loads. Therefore, Require it to have high strength. Kingpin inclination angle and front wheel camber angle)

Installation steps for front wheel horn/steering knuckle/steering knuckle arm

If the car horn needs to be replaced, it is recommended to go to a repair shop for replacement. Generally, it cannot be replaced by oneself, which is quite complex. The function of the car horn is as follows: 1. The role of the car horn is to transmit and bear the front load of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears a variable impact load, so it requires high strength; 2. The sheep horn of a car is called the "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn"; 3. The steering knuckle, also known as the "steering knuckle", is one of the important components of a car's steering, which can make the car run smoothly, stably, and sensitively transmit the direction of travel. Generally, replacing the steering knuckle requires going to a 4S store. The steering knuckle of a car is called the "steering knuckle" or "steering knuckle arm", which is located on both sides of the front I-beam and bears the steering function of the axle head. It is somewhat like a sheep horn, So it is commonly known as "sheep horn". It is recommended to consult the sales personnel or after-sales technicians of 4S dealerships. If the sheep horn is replaced, the wheels need to be disassembled. If the brake cylinder is replaced, the wheels, brake cylinder, steering rod, support arm, and wheel bearings need to be disassembled. After replacement, four-wheel alignment should be done

Mercedes Benz B-Class introduce

This Mercedes Benz B-Class is currently the cheapest entry-level car with the Mercedes Benz logo, and it is also the cheapest model in China that is equipped with an active parking assist system. In addition, there is a unique panoramic sunroof structure. Unlike the Mercedes Benz C200, the Mercedes Benz B200 uses a specially designed 2.0L inline four cylinder engine installed in the car with a slight tilt, which not only complements the special chassis structure of the B200, but also, And it can keep the cockpit as far away from the frontal collision area as possible. It is equipped with an AUTO TRONIC continuously variable transmission, also known as a CVT transmission. After being recalibrated by Mercedes Benz, it can output a maximum power of 100 kW and a torque of 185 Nm. In actual testing, the initial response of the electronic throttle is still a bit sluggish, but it is most frequently used in the area of 2500 to 3500 rpm, Having sufficient low torque performance for daily use. After shifting the gear to manual mode, the CVT gearbox with a 7-speed setting immediately enters sport mode, and the switching method is also more convenient. Although it enters sport mode, it is obvious that this car is not born for sport, so the expected value should not be too high, and the sport mode cannot have the expected push back feeling As a compact sports wagon, the Mercedes Benz B-Class has a stylish and dynamic appearance. The large three pointed star emblem on the front face is embedded in the center of the trapezoidal grille, revealing its identity. The lines on the engine compartment cover contract inward, making the headlights on both sides more sharp. The combination of the bumper and front fog lights gives the Mercedes Benz B-Class a powerful appearance