steering assembly introduce

The steering gear assembly, also known as the steering gear, is the most important component of the steering system. Its function is to increase the force transmitted from the steering wheel to the steering transmission mechanism and change the direction of force transmission. The operation of the steering gear is fully hydraulic, which means there is no mechanical connection between the steering column and the steering wheel, and there is a hydraulic pipe or hose connection between the steering gear and the steering cylinder. When the steering wheel is turned, The steering gear delivers a relative amount of oil according to the rotation ratio of the steering wheel, which flows directly to the corresponding side of the control cylinder, while the oil on the other side returns to the fuel tank. The steering gear can be divided into gear rack and pinion steering gear, worm crank finger pin steering gear, circulating ball rack and pinion gear fan steering gear, circulating ball crank finger pin steering gear, worm roller steering gear, etc. according to the power assisted form, it can also be divided into mechanical (non assisted) steering gear, There are two types of power steering systems: pneumatic, hydraulic, electric, and electro-hydraulic)

Installation steps for steering gear assembly/steering gear assembly

Step 1: After we receive the steering wheel, how do we center it? Turn the steering wheel to the end of either side, which is to kill the steering wheel, make a number, circle it to the other side, and count how many circles there are. If it is 3 circles, the left and right sides will change to 1.5 circles, which is very easy to center. Step 2: Fix the steering wheel to the chassis installation position of the car and fix the screws, Based on the brake hubs on both sides (the one where the tire is installed), adjust the approximate position of the outer ball head of the steering wheel, screw the inner ball head into the outer ball head depth to the normal position, and keep the screw thread depth on both sides consistent. Fix the locking screw on the lower ball head under the brake disc. Step 3: Install the two tires on both sides, use a tape measure, and measure the distance between the front part of the two front wheels and the two rear tires on both sides to ensure consistency, Step 4: Determine the center position of the steering wheel, put on the cross joint, and tighten the screw. Step 5: Run a circle on the road to determine the position of the cross joint. If there is any deviation, make a simple adjustment until it is basically centered. If you are the owner of the car, make sure to ask the repair shop to adjust it in place. If the repairman finds it troublesome, you cannot find it troublesome, because the last step of four-wheel alignment can only do a simple adjustment of the front speed. Step 6:, Find a professional store with four-wheel positioning

Mercedes Benz B-Class introduce

This Mercedes Benz B-Class is currently the cheapest entry-level car with the Mercedes Benz logo, and it is also the cheapest model in China that is equipped with an active parking assist system. In addition, there is a unique panoramic sunroof structure. Unlike the Mercedes Benz C200, the Mercedes Benz B200 uses a specially designed 2.0L inline four cylinder engine installed in the car with a slight tilt, which not only complements the special chassis structure of the B200, but also, And it can keep the cockpit as far away from the frontal collision area as possible. It is equipped with an AUTO TRONIC continuously variable transmission, also known as a CVT transmission. After being recalibrated by Mercedes Benz, it can output a maximum power of 100 kW and a torque of 185 Nm. In actual testing, the initial response of the electronic throttle is still a bit sluggish, but it is most frequently used in the area of 2500 to 3500 rpm, Having sufficient low torque performance for daily use. After shifting the gear to manual mode, the CVT gearbox with a 7-speed setting immediately enters sport mode, and the switching method is also more convenient. Although it enters sport mode, it is obvious that this car is not born for sport, so the expected value should not be too high, and the sport mode cannot have the expected push back feeling As a compact sports wagon, the Mercedes Benz B-Class has a stylish and dynamic appearance. The large three pointed star emblem on the front face is embedded in the center of the trapezoidal grille, revealing its identity. The lines on the engine compartment cover contract inward, making the headlights on both sides more sharp. The combination of the bumper and front fog lights gives the Mercedes Benz B-Class a powerful appearance