Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Kuncheng introduce

The Kuncheng pickup truck is a car jointly developed by FAW and General Motors. The SUV style design gives the pickup truck a bit of a fashionable atmosphere. The comfortable driving experience and practical style design are the design highlights of the Kuncheng pickup truck. The car has an exterior size of 5070 * 1740 * 1720mm; The overall driving and passenger space is 1.2 times that of a pickup truck of the same class. The size of the cargo rail is 1380 * 1465 * 480mm, and the height of the cargo rail is 100mm higher than that of a traditional pickup truck, which has an additional 20% capacity. It is equipped with a 2.2L gasoline engine and a 2.4L diesel engine, and a 5-speed manual transmission, which has good fuel efficiency