The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Kuncheng pickup truck is a car jointly developed by FAW and General Motors. The SUV style design gives the pickup truck a bit of a fashionable atmosphere. The comfortable driving experience and practical style design are the design highlights of the Kuncheng pickup truck. The car has an exterior size of 5070 * 1740 * 1720mm; The overall driving and passenger space is 1.2 times that of a pickup truck of the same class. The size of the cargo rail is 1380 * 1465 * 480mm, and the height of the cargo rail is 100mm higher than that of a traditional pickup truck, which has an additional 20% capacity. It is equipped with a 2.2L gasoline engine and a 2.4L diesel engine, and a 5-speed manual transmission, which has good fuel efficiency
Copyright © 2021.Company name All rights reserved.