Front wheel horn introduce

The sheep horn of a car is called a "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn". The steering knuckle, also known as a "sheep horn", is one of the important parts in the steering axle of a car, which can make the car stable and sensitively transmit the direction of travel. The function of the steering knuckle is to transmit and bear the front load of the car, Support and drive the front wheels to rotate around the main pin, causing the car to turn. In the driving state of the car, it bears variable impact loads, so it is required to have high strength. The front axle is equipped with a front axle head on the axle and a steering arm on the seat, just like a sheep horn, so it is called a sheep horn. Generally, it is connected to the front axle by the Liren axle, which is often the case on trucks, Nowadays, cars are all equipped with independent suspensions. Hello, the sheep horn of a car is also known as the steering knuckle assembly. The steering knuckle is one of the main components on the steering axle of a car, which can ensure stable driving and sensitively transmit the direction of travel. The function of the steering knuckle is to bear the load on the front of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears variable impact loads. Therefore, Require it to have high strength. Kingpin inclination angle and front wheel camber angle)

Installation steps for front wheel horn/steering knuckle/steering knuckle arm

If the car horn needs to be replaced, it is recommended to go to a repair shop for replacement. Generally, it cannot be replaced by oneself, which is quite complex. The function of the car horn is as follows: 1. The role of the car horn is to transmit and bear the front load of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears a variable impact load, so it requires high strength; 2. The sheep horn of a car is called the "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn"; 3. The steering knuckle, also known as the "steering knuckle", is one of the important components of a car's steering, which can make the car run smoothly, stably, and sensitively transmit the direction of travel. Generally, replacing the steering knuckle requires going to a 4S store. The steering knuckle of a car is called the "steering knuckle" or "steering knuckle arm", which is located on both sides of the front I-beam and bears the steering function of the axle head. It is somewhat like a sheep horn, So it is commonly known as "sheep horn". It is recommended to consult the sales personnel or after-sales technicians of 4S dealerships. If the sheep horn is replaced, the wheels need to be disassembled. If the brake cylinder is replaced, the wheels, brake cylinder, steering rod, support arm, and wheel bearings need to be disassembled. After replacement, four-wheel alignment should be done

Mercedes Benz CLK introduce

The Mercedes Benz CLK is a new model of Mercedes Benz, and the CLK class sports car will be launched with a new face on the basis of the E-Class. Its interior space is more spacious, the wind resistance coefficient is lower, and the power is stronger. The model consists of a roof, electronic stability program, lighting system, head airbag, automatic rollover guard, sports package, and model overview. Due to the extended wheelbase of the 2003 CLK sports car, it is generally longer, wider, and higher than the old version, The cabin space is also wider. The strength of the car body has increased by 40%, and the drag coefficient has been reduced to 0.28cd. The side windows adopt frameless design technology, which can fully retract the doors and side body. The safety configuration of the 2003 CLK mainly includes front and side airbags, side window airbags, pre tension seat belts, and impact force limiting devices. The interior decoration materials can be selected from wood or aluminum according to personal preferences, but all CLK instruments are wrapped in chrome alloy. The rear seats are foldable, This can increase storage space. Other standard devices include wipers with sensing system, headlight assist device, and air conditioning control device. Optional parts include automatic cruise control system, xenon headlights, and voice controlled telephone. In 2010, with the release of the new generation of E-Class sedans, Mercedes Benz launched E-Coupe, which is no longer used in CLK class sports car models