The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Zhonghua V5 is the first SUV model launched by Zhonghua Automobile. The front line is rounded, and the front bumper is very prominent. The six crystal clear LED light groups above the headlights also give the Zhonghua V5 a sense of technology. The side body lines are smooth. The design style of the center console is in line with the taste of most consumers, and the earthy yellow decorative panel creates a warm feeling at home; A large amount of chrome decoration makes the interior of the entire vehicle look dazzling. It is reported that the Zhonghua V5 is equipped with a 1.6L L4 engine, and a 1.5T engine version will also be launched. The two engines are matched with a 5-speed manual transmission and a 5-speed automatic transmission
Copyright © 2021.Company name All rights reserved.