Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Zhonghua V5 is the first SUV model launched by Zhonghua Automobile. The front line is rounded, and the front bumper is very prominent. The six crystal clear LED light groups above the headlights also give the Zhonghua V5 a sense of technology. The side body lines are smooth. The design style of the center console is in line with the taste of most consumers, and the earthy yellow decorative panel creates a warm feeling at home; A large amount of chrome decoration makes the interior of the entire vehicle look dazzling. It is reported that the Zhonghua V5 is equipped with a 1.6L L4 engine, and a 1.5T engine version will also be launched. The two engines are matched with a 5-speed manual transmission and a 5-speed automatic transmission
Copyright © 2021.Company name All rights reserved.