Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Crown Victoria introduce

The Ford Crown Victoria - this full-size Ford sedan, along with its sister model Marquis Mercury, is the last representative of disappearing American automotive treasures: a non load bearing body with a wide body. The conservative design of the rear axle is popular among older customers, taxi drivers, and police officers. The Victoria Crown is equipped with Ford's standard 8-cylinder engine with overhead camshafts, The displacement is 4.6 liters and there are two power levels. As a representative of American automotive culture, the Ford Victoria Crown, which has been in production for 32 years, was officially discontinued on August 31, 2011