Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Great Wall Euler (GWKULLA) is the latest two seater pure electric new energy vehicle developed by Great Wall. The vehicle is completely driven by an electric motor, small and exquisite, with a unique design. The Euler electric vehicle adopts a dual door and two seat body layout, which breaks through the conventional design and appears very cartoonish. The power system is a major highlight. The Great Wall Euler is equipped with a 48V DC motor, which can travel 140 kilometers on a single charge, The speed can reach 65 kilometers per hour. The driving range fully meets the daily travel needs of large and medium-sized cities. It truly achieves zero pollution, zero emissions, ultra-low operating costs, and reflects the design intention of energy conservation and emission reduction
Copyright © 2021.Company name All rights reserved.