Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Toyota Yaris L introduce

The Toyota Yaris L, with a body length of 4115mm and a wheelbase of 2550, gives it a significant advantage in space and other aspects compared to competing models such as Honda Fit, Volkswagen Polo, and Ford Fiesta. This car has two powertrain options and six configuration models are available in China, The guide price ranges from 69800 to 108800 yuan. The Zhixuan does not have many configurations specifically designed to improve comfort. The seat positions of all models are manually adjusted. This sporty version of the model uses fabric seats, which are very sporty and wrap around the body well. However, the seat softness is not high, and sitting for a long time may be uncomfortable. In idle mode, the Zhixuan appears very quiet, but when the speed reaches a certain value, the noise becomes very obvious, At speeds of 60km/h and 80km/h, the noise levels are 59.8 and 62.3 decibels, respectively. At this time, most of the noise comes from the engine and wind noise, and there is no sense of the noise caused by resonance of certain components inside the car