Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Volkswagen Weilan New Energy introduce

In terms of interior design, both Volvo from Scandinavia and Volkswagen from Germany are based on simplicity. The Volvo V60 is designed with a simple yet luxurious feel, while the Volkswagen NIO maintains Volkswagen's stable T-shaped layout. It is worth mentioning that the biggest highlight of the all-new B8 in terms of interior design comes from the integrated front air outlet design, which is not a big change, but very clever. In terms of seats, The sports seat configuration of the Volvo V60 is obviously higher, with electric adjustment for both the driver and passenger seats, as well as seat memory function for the driver's seat. In contrast, the Volkswagen NIO has more options for seat adjustment. The electric backrest adjustment for the driver's seat allows for manual adjustment of the front and rear height of the seat. In addition, the front seats also have manually adjustable leg rests and headrests that can be adjusted up and down in four ways, although the configuration is not as good as the V60, However, it can provide a more comfortable sitting position. As a station wagon, storage space is equally important. In this regard, both models have their own advantages. Firstly, in terms of storage compartment settings, the Volkswagen Weilan has a more diverse storage compartment compared to the Volvo V60; In addition, in terms of practicality, the Volkswagen NIO also has advantages. Taking the storage compartment next to the rear door as an example, the Volkswagen NIO can easily accommodate two bottles of mineral water, while the V60 looks somewhat impractical; However, the advantages of V60 come from the design of some storage compartments, such as the layered design of the glove box and the multiple folding designs of the rear center armrest, which enhance the practicality of these two parts through design