The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)
The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan
The Volkswagen Atlas is a large and medium-sized SUV launched by Volkswagen. Volkswagen has officially released the official image of its new mid to large SUV, Atlas, in the United States. Atlas is also the name of a Hercules in Greek mythology. Its domestic version will be officially unveiled at the 2016 Guangzhou Auto Show and officially launched in China in the first quarter of 2017. The Volkswagen Atlas has a powerful appearance, rough overall body lines, and front LED headlights are connected to the grille, The dual color front bumper, paired with a thick chrome grille, gives a very domineering feeling. The unique waistline is outlined on the side of the body, which is stable and thick. After being produced domestically, the car will be equipped with 2.0T and 2.5T V6 engines. The 2.0T engine is divided into high and low power versions, with maximum power of 162kW (220PS) and 137kW (3] W (186PS) respectively. The high-power version adopts Miller cycle technology, matched with a DQ500 7-speed wet dual clutch transmission and four-wheel drive system, The low-power version adopts front wheel drive. The newly added 2.5T V6 engine has a maximum power of 220kW2 (299PS) and a peak torque of 500Nm, matched with a DQ500 7-speed wet dual clutch transmission and four-wheel drive system
Copyright © 2021.Company name All rights reserved.