The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
The Volkswagen Atlas is a large and medium-sized SUV launched by Volkswagen. Volkswagen has officially released the official image of its new mid to large SUV, Atlas, in the United States. Atlas is also the name of a Hercules in Greek mythology. Its domestic version will be officially unveiled at the 2016 Guangzhou Auto Show and officially launched in China in the first quarter of 2017. The Volkswagen Atlas has a powerful appearance, rough overall body lines, and front LED headlights are connected to the grille, The dual color front bumper, paired with a thick chrome grille, gives a very domineering feeling. The unique waistline is outlined on the side of the body, which is stable and thick. After being produced domestically, the car will be equipped with 2.0T and 2.5T V6 engines. The 2.0T engine is divided into high and low power versions, with maximum power of 162kW (220PS) and 137kW (3] W (186PS) respectively. The high-power version adopts Miller cycle technology, matched with a DQ500 7-speed wet dual clutch transmission and four-wheel drive system, The low-power version adopts front wheel drive. The newly added 2.5T V6 engine has a maximum power of 220kW2 (299PS) and a peak torque of 500Nm, matched with a DQ500 7-speed wet dual clutch transmission and four-wheel drive system
Copyright © 2021.Company name All rights reserved.