The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Baojun 330 is a brand new three box small car under the Baojun brand, which will be equipped with a 1.5-liter engine. In terms of design, it can be seen from the application drawings that the new car continues the Baojun family's front face design, with the brand logo embedded in the center of the shield shaped air intake connected to both sides of the headlights, and the design below the bumper is very layered. In terms of tail design, the Baojun 330 incorporates multiple horizontal line designs, with a clear sense of hierarchy, At the same time, it can be seen that the car is equipped with a reverse radar. In addition, the new car will also offer various wheel styles to choose from. In terms of body size, the length, width, and height of the Baojun 330 are 4300/1748/1500 millimeters respectively, and the wheelbase is 2520 millimeters
Copyright © 2021.Company name All rights reserved.