Yuanbaoliang, the concept of "subframe", is a new term often used in car books. This component is not only found in Volkswagen cars, but also in other car models. The subframe is not a complete frame, but only a bracket that supports the front and rear axles and suspension, connecting the axles and suspension to the "main frame" through it, commonly known as the "subframe". The function of the subframe is to block vibration and noise, reduce their direct entry into the car compartment, so it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes for engines)
1: Two horns of the gearbox: 2. Return oil pipe and oil pipe of the steering gear. 3. Half shaft and balance rod. Direction rod. 4. Connection of the steering intermediate shaft to the steering gear. 5. Installation of four fixing screws for the Yuanbao beam. 1. Fixation of four screws and intermediate shaft. 2. Two oil pipes. 3. Horn, half shafts and pull rods on both sides
The Baojun 330 is a brand new three box small car under the Baojun brand, which will be equipped with a 1.5-liter engine. In terms of design, it can be seen from the application drawings that the new car continues the Baojun family's front face design, with the brand logo embedded in the center of the shield shaped air intake connected to both sides of the headlights, and the design below the bumper is very layered. In terms of tail design, the Baojun 330 incorporates multiple horizontal line designs, with a clear sense of hierarchy, At the same time, it can be seen that the car is equipped with a reverse radar. In addition, the new car will also offer various wheel styles to choose from. In terms of body size, the length, width, and height of the Baojun 330 are 4300/1748/1500 millimeters respectively, and the wheelbase is 2520 millimeters
Copyright © 2021.Company name All rights reserved.