The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
The Baojun 330 is a brand new three box small car under the Baojun brand, which will be equipped with a 1.5-liter engine. In terms of design, it can be seen from the application drawings that the new car continues the Baojun family's front face design, with the brand logo embedded in the center of the shield shaped air intake connected to both sides of the headlights, and the design below the bumper is very layered. In terms of tail design, the Baojun 330 incorporates multiple horizontal line designs, with a clear sense of hierarchy, At the same time, it can be seen that the car is equipped with a reverse radar. In addition, the new car will also offer various wheel styles to choose from. In terms of body size, the length, width, and height of the Baojun 330 are 4300/1748/1500 millimeters respectively, and the wheelbase is 2520 millimeters
Copyright © 2021.Company name All rights reserved.