Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Chery Areze 5e New Energy introduce

The Arrizo 5e was launched in the Beijing region in 2017. In terms of appearance, the Arrizo 5e basically continues the design of the gasoline version, but has been replaced with a starry black air intake grille. The new Arrizo 5e has a maximum range of over 410km. In terms of configuration, the Arrizo 5e will be equipped with a sunroof, body stability system, side air curtains, reverse radar/imaging, etc. In terms of power, the Arrizo 5e will adopt pure electric drive, equipped with a 122Ps electric motor, The peak torque is 276N · m. The new Arrizo 5e is equipped with a 49kWh ternary lithium battery, with a comprehensive driving range of 351km and a maximum driving range of over 410km