tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Chery Areze 5e New Energy introduce

The Arrizo 5e was launched in the Beijing region in 2017. In terms of appearance, the Arrizo 5e basically continues the design of the gasoline version, but has been replaced with a starry black air intake grille. The new Arrizo 5e has a maximum range of over 410km. In terms of configuration, the Arrizo 5e will be equipped with a sunroof, body stability system, side air curtains, reverse radar/imaging, etc. In terms of power, the Arrizo 5e will adopt pure electric drive, equipped with a 122Ps electric motor, The peak torque is 276N · m. The new Arrizo 5e is equipped with a 49kWh ternary lithium battery, with a comprehensive driving range of 351km and a maximum driving range of over 410km