The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
The QQ3 pure electric vehicle is a small pure electric sedan developed on the Chery S11 vehicle platform. The vehicle is equipped with a 60V 6KW electric drive system and a 150Ah high-performance power battery The entire vehicle manufacturing process of QQ3 pure electric vehicle is very mature, following the traditional automobile manufacturing process platform, and there is no significant difference in appearance from the traditional QQ3. The word "EV" at the tail can distinguish it as a zero emission, pollution-free green transportation vehicle. The internal space and other aspects are also similar to the traditional QQ3. According to technicians, the motor tachometer has replaced the traditional engine tachometer, making it easy to monitor the operating speed of the motor in real time; The battery level is converted into voltage and displayed on the traditional QQ3 car fuel gauge. The ideal vehicle speed and battery level are marked in green to remind drivers to operate the vehicle better and extend its lifespan
Copyright © 2021.Company name All rights reserved.