Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

BEIJING X3 Beijing X3 introduce

In terms of appearance, the Beijing X3 has a relatively fashionable front face with an inverted trapezoidal grille and a horizontal air intake grille. It is surrounded by thick chrome plating, which looks delicate. The triangular headlights on both sides are connected by a chrome plating strip in the middle, and one corner is connected to the grille. The light source is LED, which has a good lighting effect. Below the headlights is the fog light area, and the fog light area of the Beijing X3 is designed in an "L" shape, which is very fashionable