The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)
Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining
The Shenbao D50 is the first A-class family sedan under the Shenbao brand, which inherits the Nordic minimalist design concept in appearance and is part of the "whole vehicle development" Manufacturing process Supply Chain Management On May 11, 2013, Beijing Automotive announced the official launch of its first mid to high end sedan, the Saab, and took the lead in implementing the national standard "three guarantees" policy from May 11. The Saab D50 not only fully inherits the Saab's performance genes of "integrating people and vehicles, and flying close to the ground," but also has the top high standard quality management system in Nordic countries, And further combining international cutting-edge car manufacturing trends with the needs of the Chinese market, we have condensed and formed the unique "TESC" four product advantages of "Turbo power, Equipment configuration, Safety and safety. Control control control". At the same time, we have innovatively upgraded in appearance, interior design, driving comfort, intelligent technology, and other aspects
Copyright © 2021.Company name All rights reserved.