The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Shenbao D20 is a car produced by Beijing Automotive Company, with front wheel drive as the driving mode. As an A0 level performance sedan also built with the SAAB quality management system, the Beiqi Shenbao D20 fully showcases the brand gene of "performance persistence" with its four major highlights of international quality, technological intelligence, fashionable design, and thoughtful service, And a comprehensive quality upgrade has been carried out on the basis of the original Beijing Automotive E-series. This car will win the favor of the post-80s consumer group who pursue fashion and pay attention to quality, and will also become a new quality benchmark in the A0 level automotive market in China
Copyright © 2021.Company name All rights reserved.