Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

BAIC Changhe Q7 introduce

In 2017, the new compact SUV, BAIC Changhe Q7, under the BAIC Changhe brand, was officially unveiled. The new car has a rugged and square design, and is available in a 5-seater/7-seater version. It is reported that the new car will be officially put into production within the year. The body side of the BAIC Changhe Q7 adopts a suspended roof, and the A/B/C/D pillars are all painted in black, which has an excellent visual effect. The tail adopts a left and right through type tail light design, which is highly recognizable when lit. In terms of size, The new car has a length, width, and height of 4655/1855/1720mm, and a wheelbase of 2670mm. The BAIC Changhe Q7 is equipped with a large-sized LCD display screen and vertical air conditioning vents. At the same time, the new car is equipped with a leather multifunctional steering wheel, front seat ventilation/heating, reverse radar, one click start, and other configurations. In addition, the new car will offer two layout forms for consumers to choose from: 5 seats and 7 seats