The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Changhe M70 will be officially launched on January 12, 2017, and will offer three seat layouts of 5/7/8. It will be equipped with a 1.5L 5-speed manual transmission power combination. In terms of appearance, the Changhe M70 is completely a family MPV. In terms of size, the length, width, and height of the car are 4720/1770/1828mm, and the wheelbase is 2810mm. In terms of front face, the new car adopts a three spoke chrome grille, which is completely integrated with the front headlights, which is quite exquisite. In terms of configuration, The Changhe M70 comes standard with automatic headlights, front fog lights, induction wipers, and rear parking radar; Some models are also equipped with optional features such as a reverse camera and front parking radar
Copyright © 2021.Company name All rights reserved.