The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Besturn X80 is built on the M1 platform. In terms of power, the Besturn X80 will be equipped with a 2.0L or 2.3L engine, with maximum power of 146 horsepower and 154 horsepower respectively, and peak torque of 183N · m and 205N · m. At the 2013 Shanghai Auto Show, the Besturn X80 released a 1.8T version, which will be put into production in the future. In terms of transmission system, the Besturn X80 engine is another Besturn product launched by FAW after the flagship model Besturn B90, This model has achieved many innovations and breakthroughs, especially in terms of overall vehicle design and handling; The new car is built on the M1 platform, and the chassis adopts the first independent front and rear suspension among similar models. The body has a perfect curve, fashion, and atmosphere, and the interior has elegant settings
Copyright © 2021.Company name All rights reserved.