fog lamp introduce

The following is an introduction to the functions of car front fog lights: 1. Let other vehicles see the car in foggy or rainy weather conditions where visibility is greatly affected by weather. 2. Install in the front of the car slightly lower than the headlights, used to illuminate the road when driving in rainy and foggy weather. 3. It can improve the visibility of the driver and surrounding traffic participants, To enable oncoming vehicles and pedestrians to detect each other from a distance, the following are the operation methods for activating the front and rear fog lights: 1. Joystick on type: Start the fog lights by rotating the switch on the joystick. When the button marked with the fog light signal is turned to the ON position, the front fog lights will turn on, and then turn the button down to the rear fog light position, that is, turn on the front and rear fog lights at the same time. 2. Button on type: Start the front and rear fog lights by pressing the button, and mark the fog light button near the dashboard or center console, Press the front and rear fog light buttons separately to turn on the front and rear fog lights)

Installation method of front fog lights/rear fog lights/LED fog lights/warning lights

1. First, remove the black outer shell of the vehicle fog light, pull out the wiring harness inside, remove the snake head, and leave the plug. 2. Remove the lining near the fog light inside the wheel hub, which can be pried open with a screwdriver or other tools for convenient installation of the fog light later. 3. Install the newly purchased fog light at the wiring harness plug that was just found, fix it with a screwdriver or other tools, and then install it at the dug circular hole, fix it, and finally restore the removed lining

BAIC Weiwang 307 introduce

The Weiwang 307 is an extended version of the Weiwang 306, with a length of 4495mm and a wheelbase of 2920mm. As a result, the Weiwang 307 has a larger rear space. The front face of the Weiwang 307 has a more overall feel, and the two mesh grilles make the vehicle more refined and upgraded to a certain extent. The red BAIC logo is also quite festive. It has an additional window on the side that can be opened, which can be used by rear passengers for ventilation and breathability, The interior environment of the Weiwang 307 will become better. Of course, the interior design of the Weiwang 307 is mainly practical, with a simple and simple console design that has obvious Japanese micro car characteristics. The speedometer is a traditional scale, and information such as the tachometer, water temperature gauge, oil gauge, and time are displayed through the digital instrument panel on the right. The Weiwang 307 can be equipped with four rows of seats, and the maximum number of passengers in the car can be increased to 9. If only two rows of seats are selected, So most car owners plan to use this car as a truck. After removing the rear seats, the rear compartment forms a complete loading space. In addition, there are many small storage spaces available on the Weiwang 307, which is very convenient. In terms of power, the Weiwang 307 currently only has a 1.2L four cylinder engine, with a maximum power of 63.5kW and a maximum torque of 108Nm. It is equipped with a 5-speed manual transmission and adopts rear wheel drive. The low-end models do not have steering assistance, making it difficult to turn the wheels in place