ABS pump introduce

ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)

ABS pump installation and disassembly method

1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket

BAIC Weiwang 407EV New Energy introduce

In terms of appearance, although this car is a pure electric box truck, its appearance tends to be designed in the style of a concept car. Because it does not need to collide with the wind and dissipate heat like an oil burning motor vehicle, the front face of the car only uses a banner style black paint decorative panel, which is integrated with daytime running lights, making the entire truck look full of texture. Although the rear end is relatively square, the rich line design gives the rear end a certain sense of hierarchy, The rectangular tail lights with a vertical bar style are also very stylish, and the lighting effect is stunning. According to the vehicle positioning, the Weiwang 407EV can not only enter through the rear door in crowded streets, but also through the sliding door on the right side. The tail door adopts a 4/6 ratio split design, making it more convenient and flexible to get off and transport goods. The entire trunk volume of the car is 4.5 cubic meters, and the load capacity can reach 810kg